General Specifications

Sample Rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz
Bit depths: 16bit; 24bit
Disk interface: USB2
Format: FAT32
File type: Broadcast WAV (BWAV)
Media: USB2 hard disk (7200rpm recommended),
  USB2 flash drive - 200x minimum (except for
  MADI and DANTE systems which have more
  demanding data rates), SHDC (Class 10 with
  suitable adapter except MADI and DANTE)
Monitoring: 1 x 1/4” TRS jack socket,
  headphone mix/solo
Physical: 19” rack mounted 1U
Dimensions: (425mm x 150mm x 44mm)
Weight: < 2.4kg

Control and Synchronisation

MIDI: 1 x 5-pin DIN (open loop) – MIDI time
  code (MTC) and MIDI machine control (MMC)
  protocol
LTC: 1 x 1/4” TRS jack socket:
  Frame rates supported: 30fps, 29.97drop fps,
  29.97non-drop fps, 25fps, 24fps, 23.98fps
Machine control: 1 x 9-pin D, SONY PII protocol
Audio clock synchronisation: 2 x RCA sockets
  AES3 / SPDIF Format, also used for
  communications to slave units
Footswitch: momentary switch on ring of LTC
  TRS socket
Keyboard: 1 x mini DIN PS2 connector,
  Standard 102 key
Power: 9v – 16V dc (< 25W). 2.1mm dc inlet.
  PSU supplied

Analogue Inputs:

Levels: -10dBu / +4dBu switchable
Max input level: +22dBu = 0dBFS
A-D conversion: 24bit, 96kHz
106dB S/N, 96dB THD+N (typical A-weighted)

Analogue Outputs:

Levels: -10dBu / +4dBu switchable
Max output level: +22dBu = 0dBFS
D-A conversion: 24bit, 96kHz
106dB S/N, 94dB THD+N (typical A-weighted)

BBR1U

Unbalanced i/o via 3 x 25way D-sub connectors (3 x ¼" TRS multicore looms supplied – TASCAM analogue format). Designed to plug across the insert points on a standard analogue console

Loop through outputs available on ch 17-24 on ¼" TRS jack sockets for connection to outboard equipment

BBR1B

Balanced i/o via 6 x 25way D-sub connectors. Lower row – inputs; Upper row – outputs. (TASCAM analogue format, cable looms not supplied)

No loop through outputs. Power: 30W PSU supplied. Other connectors as BBR1U

BBR1A

Lightpipe i/o via 3 x TOSLINK inputs and 3 x TOSLINK outputs (24 channels @ 48k, 12 channels @ 96k). Word clock input on BNC. Unbalanced analogue as BBR1U (cable looms not supplied)

Loop through outputs as BBR1U available on analogue i/o only. Other connectors as BBR1U

BBR1D

AES3 (2003) i/o via 3 x 25way D-sub connectors – upper row. (Yamaha format pin out standard). Word clock input on BNC. Unbalanced analogue as BBR1U (cable looms not supplied)

Loop through outputs as BBR1U available on analogue i/o only. Power: 30W PSU supplied. Other connectors as BBR1U

BBR64-MADI

MADI coax (BNC) in and out. MADI optical in and out. Wordclock in or out (switchable BNC).
8 x balanced analogue inputs on 25w D-type (Tascam format)

No loop through outputs. Power: 20W on 4pin mini XLR - universal PSU supplied. Other connectors as BBR1U

BBR64-DANTE

Standard DANTE Ethernet connection on RJ45 connector. Wordclock in or out (switchable BNC).
8 x balanced analogue inputs on 25w D-type (Tascam format)

No loop through outputs. Power: 20W on 4pin mini XLR - universal PSU supplied. Other connectors as BBR1U