Rear Panel Connectors
Analogue i/o
3 x 25 way Female D-type (lower row = inputs, wired to TASCAM standard pin out for balanced i/o)
3 x 25 way Female D-type (upper row = outputs, wired to TASCAM stadard pin out for balanced i/o)
The loop through insert points are not available on the BBR1-B Balanced i/o version as the outputs can be wired directly into the downstream equipment. Note: The BBR1-B is not supplied with cable looms as there are too many variations that might be required. JoeCo or your local dealer will be able to supply you with the right cable looms for your installation.
Monitoring
1 x 1/4" stereo TRS jack socket: Headphone output
Control and Synchronisation
1 x 1/4" TRS jack socket: Linear Time Code (LTC) Reader / Footswitch
1 x 5-pin DIN: MIDI Time code (MTC) and MIDI Machine Control (MMC)
1 x 9-pin Male D-type: SONY PII protocol
2 x RCA sockets: AES/SPDIF word clock reference input / communications to auxiliary units
Other Connectors
1 x USB2 (480Mb/s) interface to disk drive
1 x mini DIN: PS2 keyboard socket
1 x 2.5mm dc inlet (9Vdc power) - power adapter supplied
Specifications
Sample Rates supported:
44.1kHz, 48kHz, 88.2kHz & 96kHz
Latency (line in to line out)
Zero. (Line in monitor by relay bypass for power failsafe, E-E selectable when powered if preferred).
Analogue Inputs
levels: -10dB / +4dB switchable
Max input level: +22dBU = 0dBFS
A-D conversion: 24 bit, 96kHz
106dB S/N; 96dB THD+N (typical A-weighted 48kHz)
Analogue Outputs
levels: -10dB / +4dB switchable
Max output level: +22dBU = 0dBFS
D-A conversion: 24 bit / 96kHz
106dB S/N; 94dB THD+N (typical A-weighted 48kHz
Timecode Reader
Frame Rates: 24,25,29.97 drop and non-drop, 30 fps; Trigger only (no chase)
Physical
19" rack mountable - 1U high
Dimensions: 425mm x 150mm x 44.4mm
Weight: 2.1kg
dc input: 7.5V - 15V
Power consumption: <25W